Omicron CMGPS
Protection relay GPS
The CMGPS receives signals from the satellites of the Global Positioning System (GPS) and provides an output at a time specified by the user. This clock output is then used as a trigger input to start the CMC test set. The CMGPS has been developed to fulfill the requirements of testing in the field, because off-the-shelf GPS receivers with trigger output have many drawbacks (size, weight, complicated operation, etc).
Key Features
- CMGPS is typically ready for operation just 5 minutes after startup
- The synchronizing pulse can be configured according to the requirements of the application
- The software is integrated in the testing modules (like the State Sequencer), allowing for the setting of:
- first output pulse
- pulse rate and polarity
- Two independent timing pulses are available via separate connectors:
- Pulse out 1: 16-pin plug which is connected to the CMC test set (external interface)
- Pulse out 2: two 4mm banana plugs
Facing something complex or unsure?
Talk to a power system engineer for a solution. (08) 8259 8100
Omicron 256 / 256+
Protection relay testing
The CMC 256plus is the first choice for applications requiring very high accuracy. This unit is not only an excellent test set for protection devices of all kinds but also a universal calibrator.
Key Features
- Protection test set and universal calibrator in one device
- Testing of all relay generations – electromechanical, static, numerical, IEC 61850
- Highly accurate test signals. For meter testing: The sources are the reference – no additional reference meters are required
- Integrated network for testing IEC 61850 IEDs
- 10-channel analog measurement and transient recording functionality
Facing something complex or unsure?
Talk to a power system engineer for a solution. (08) 8259 8100
Omicron 356
Protection relay testing
The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful six current sources (three-phase mode: up to 64 A / 860 VA per channel) with a great dynamic range, make the unit capable of testing even high-burden electromechanical relays with very high power demands.
Key Features
- Powerful current sources for testing even high-burden electromechanical relays
- High current amplitudes for 5 A relay testing
- High accuracy and versatility for testing static and numerical relays of all types
- Integrated network for testing IEC 61850 IEDs
- 10-channel analog measurement and transient recording functionality (option)
Facing something complex or unsure?
Talk to a power system engineer for a solution. (08) 8259 8100